Products

Rolling stock parts, test equipment and inspection systems

Depot Test Equipment

We design, build and supply component test equipment used in the periodic maintenance of rolling stock.

Inverter & C/I Tester

Inverter & C/I Tester

Verifies VVVF inverter and converter units that control traction motors.

Power, start/restart, protection circuit, gate signal and main circuit tests

Static Inverter (SIV) Tester

Static Inverter (SIV) Tester

Verifies SIV controllers that supply power to cabin lighting and HVAC.

Power, start/restart, protection circuit and gate output tests

Circuit Breaker Tester

Circuit Breaker Tester

Tests line breaker boxes and high-speed circuit breakers.

HSCB, LB sequence, DCCT/DCPT, insulation and withstand voltage tests

Traction Motor Tester

Traction Motor Tester

Tests traction motors, with 1, 4 or 8 test benches.

Forward/reverse rotation, high-speed and insulation tests

Brake System Tester

Brake System Tester

Tests brake operating units (BOU) and brake electronic control units (ECU).

BOU, ECU, pressure sensor and insulation tests

Brake Valve Tester

Brake Valve Tester

Tests individual valves of the brake system.

Valve function and insulation tests

Brake Cylinder Tester

Brake Cylinder Tester

Tests the performance of brake cylinders.

Air leakage, pressure, slack adjuster, output and release tests

Block Brake Tester

Block Brake Tester

Tests the performance of tread brake units.

Air leakage, pressure, slack adjustment, output and release tests

Air Compressor Tester

Air Compressor Tester

Tests main and auxiliary air compressors.

Air leakage, performance, safety valve and insulation tests

Oil Damper Tester (Hydraulic)

Oil Damper Tester (Hydraulic)

Tests oil dampers using a hydraulic unit.

Damping force measurement

Oil Damper Tester (Servo Motor)

Oil Damper Tester (Servo Motor)

Tests oil dampers using a servo motor drive.

Damping force measurement

Air Spring Tester

Air Spring Tester

Tests suspension air springs.

Air tightness and pressure tests

Pantograph Tester

Pantograph Tester

Tests the performance of pantographs.

Rise/fall time, contact force, minimum pressure, air leakage and max height tests

Master Controller Tester

Master Controller Tester

Tests one-handle and two-handle master controllers in the driver's cab.

Dead man switch, activation key, handles, potentiometer output and insulation tests

Relay Tester

Relay Tester

Tests control relays of high-speed trains and EMUs.

Pick-up/drop-out voltage and time, coil and contact resistance, chattering tests

Jumper Coupler Tester

Jumper Coupler Tester

Tests inter-car jumper couplers.

Continuity, vibration and insulation tests

HVAC Controller Tester

HVAC Controller Tester

Tests railway HVAC controllers.

Voltage variation, sensor, TCMS communication, power detection and mode switch tests

ATC Tester

ATC Tester

Tests on-board ATC equipment.

Driving mode, speed detection, I/O, status and power tests

ATC/ATS Tester

ATC/ATS Tester

Tests combined ATC/ATS on-board equipment.

I/O, changeover, overspeed, simulated running, fault detection and signal response tests

TCMS Tester

TCMS Tester

Tests train control and monitoring systems (TCMS).

DI, DO, communication, power and insulation tests

PA & Display Tester

PA & Display Tester

Tests public address and passenger information displays.

Voltage variation, electrical characteristics, automatic/manual PA and display tests

Axle Ultrasonic Testing System

Axle Ultrasonic Testing System

Polishes axles and inspects them by ultrasonic testing.

Axle polishing; 0°, 17°, 24°, 45° and 55° probes

Magnetic Particle Inspection System

Magnetic Particle Inspection System

Detects surface defects in couplers and fittings by magnetic particle inspection.

Magnetic particle inspection

High-Speed Train Gearbox Tester

High-Speed Train Gearbox Tester

Tests motor gearboxes of high-speed trains.

Rotation, temperature and vibration tests

Drive Gear No-Load Tester

Drive Gear No-Load Tester

Tests EMU drive gear assemblies under no load.

No-load running, temperature, lubricant temperature and vibration tests

Battery charger/discharger NST-10050

Battery Charger/Discharger

Charges and discharges battery banks at constant current to test real capacity and monitor cell voltages.

NST-10050 · charge 0–50 A · discharge 0–100 A · DC 10–132 V

Partner Equipment (EASYDUR)

Partner Equipment (EASYDUR)

We supply test equipment from our partner EASYDUR.

Oil damper, bogie, spring, hardness (world's largest capacity), vision and wheel testers

Rolling Stock Parts

We design and manufacture rolling stock components to customer specifications.

HVAC Controller (MICOM)

HVAC Controller (MICOM)

Communicates with temperature/CO₂ sensors and the TCMS to control heating, cooling, fans and dampers automatically or manually.

-40 to 85°C · DC 100 V (70–110 V)

EMU-150 Cab HVAC Controller

EMU-150 Cab HVAC Controller

Installed in the cab HVAC panel to control the driver's cab air conditioning.

-35 to 45°C · DC 100 V (70–125 V)

EMU-150 Cabin HVAC Controller

EMU-150 Cabin HVAC Controller

Controls cabin heating, cooling and ventilation using temperature, CO₂ and fine dust sensors.

-35 to 45°C · DC 100 V (70–125 V)

PWM Encoder

PWM Encoder

Converts master controller (MASCON) and ATO commands into PWM signals for VVVF and BOU units.

STM32F407 · Ethernet to TCMS · -25 to 70°C

Cabin Temperature & CO₂ Sensor

Cabin Temperature & CO₂ Sensor

Measures cabin temperature and CO₂ and sends the values to the HVAC controller.

-40 to 125°C · DC 12 V

Cabin Temperature Sensor

Cabin Temperature Sensor

Measures cabin temperature and sends it to the HVAC controller.

-40 to 125°C · DC 12 V

Fine Dust Sensor

Fine Dust Sensor

Measures cabin fine dust and reports to the controller over RS-485.

Laser scattering · 0–500 µg/m³

Outdoor Temperature Sensor

Outdoor Temperature Sensor

Installed at the cab end to send outdoor temperature to the TCMS.

PT100 · -30 to 60°C

AMiT MVB gateways and MVB modules

MVB Gateways & Modules (AMiT)

MVB gateways and MVB modules that convert Ethernet or CAN communication to MVB in both directions, from our partner AMiT.

MVB/Ethernet and MVB/CAN gateways · EN 50155 · IEC 61375-3-1 · -40 to 70°C

TRDP Modules (AMiT)

TRDP protocol modules for real-time data exchange on Ethernet-based train networks (ECN/ETB), from our partner AMiT.

TRDP (TCNOpen 1.3.3.0) · 2× Ethernet · UART/CAN/SPI/Ethernet host · -40 to 70°C

Other Components

  • DC/DC power supplies
  • Display power supplies
  • IP camera DC/DC power
  • A/C compressor inverters
  • PMSM A/C compressors
  • Cabin plasma air purifiers
  • PMSM PCB stator motors for evaporators and condensers
  • Arresters

Wayside & Catenary Inspection

Automated systems that measure the condition of trains and infrastructure from the wayside and overhead line.

Trackside Vehicle Inspection

Trackside Vehicle Inspection

Installed along the track to measure and inspect key parts of passing trains automatically.

Wheel profile, brake shoe/disc measurement, trackside bogie inspection (TBOGI), WID

Overhead Line Measurement

Overhead Line Measurement

Measuring equipment for overhead contact lines (partner: MEIDENSHA).

Catenary and peripheral inspection systems

Catenary Facility Inspection

Catenary Facility Inspection

Inspects catenary facilities and surrounding equipment.

Tunnel wall inspection, rail fastening and surroundings inspection

Network, Power & EV Charging

Train network equipment, industrial power supplies and EV charging modules.

TCN Ethernet Switches

TCN Ethernet Switches

EN50155 industrial Ethernet switches: NS-8T4GT-P110 for ECN (Layer 2, optional PoE) and NS-TBN-8T4GT-HV for ETB (Layer 3, TRDP).

Gigabit M12 · ring redundancy · IP67 · -40 to 75°C

Industrial Power Supplies

Industrial Power Supplies

Industrial and high-capacity power supplies based on our railway power supply technology.

PA transmitter power, power distribution units, IDRC power supplies

EV Charging Modules

Power conversion modules for electric vehicle chargers.

DC 750 V class · DC 1000 V class

Supplied Equipment

Depot maintenance equipment supplied with our global partners.

Underfloor Wheel Lathes

Underfloor Wheel Lathes

Machine wheelsets without removing them from the vehicle or bogie. Single or tandem configurations, highly customizable.

DLR: light rail, metro, tram, high-speed · DHD/DHD+: locomotives

Train Lifting Systems

Train Lifting Systems

Lift single cars or coupled trainsets without attaching devices to the vehicle, for repairs and bogie exchange.

Bogie lifting units (BLU), chassis lifting jacks (CLJ), support bars

Looking for equipment built to your specifications?

Contact Us